A 10-Point Plan for (Without Being Overwhelmed)

Tips of Replacing a Fence on your Own

There are times when the fence gets old and sags hence requiring replacement. If you are keen enough with your fence, you may be surprised to find it down. At times, the details of the fence are the reason the fence loses its integrity. Here the factors that you should consider when replacing your fence.

First, you need to be aware about the local zoning laws. The authorities will have to approve construction of certain structures. You should determine whether a permit is required before you commence the construction, even if you are doing it on the old space. You don’t want to be fined for constructing a structure without acquiring a permit first. While doing the construction, you need to ensure that the structure adheres to the approved design. The new fence may end up being destroyed for not meeting the required standards, and you may even be fined for the same. You should also check with your utility provider even if you intend to build the fence on the same spot. This is important because you don’t want to interfere with water or electricity lines passing underground.

You should also consider the available materials and the required materials for the construction of the new fence. The length of time that you want your fence to last should be in your mind first before going for the materials. You should also take into consideration the amount of money you have before you can go about to purchase the construction materials. You should buy high quality wood if you want to have a durable fence. Obviously, you will spend more to get this type of wood, but if the money is enough, you can decide to replace the wood with the aluminum vinyl. All the remains of the old fence must be removed from the site so that you can get the space to dig deeper for the posts. The materials required in the building of a sturdy fence ought to be very strong. And the foundation has to be firm as well.

You should then map out the entire fence layout so that you don’t get out of the position of the old fence. You are supposed to determine where your corners will be as well as where you will be laying the posts. You can use strings and batters to do the markings. You can then dig holes using a shovel and digging bar. Power augers can be used to dig the holes if the compound is huge because you may end up spending a lot of energy and time to accomplish the digging. You should ensure that the holes are deep enough according to the codes, and then set the posts in those holes.